rrobbone's Recent Activity

  1. rrobbone replied to the thread First Tune With The Helix Lt.

    Sounds like you’re enjoying the 2.8 update!

    Jul 20, 2019 at 2:20 PM
  2. rrobbone replied to the thread Gibson Says You've Been Warned.

    In that case, at least according to GIbson... you should buy a Dean.

    Jul 17, 2019 at 4:39 PM
  3. rrobbone replied to the thread Woodworking Q: Enlarging A Drilled Hole?.

    No argument here! I welcome the discussion. You make an excellent point. I assumed that since the studs were larger diameter at the...

    Jul 16, 2019 at 10:26 PM
  4. rrobbone replied to the thread Woodworking Q: Enlarging A Drilled Hole?.

    In replacing a stud with a larger diameter stud, the pivot point of the trem on those studs will be moved back ever so slightly because...

    Jul 16, 2019 at 9:24 PM
  5. rrobbone liked Mickey's post in the thread Titanium Nitride Fretwire?.

    Sure! If you could do the setup, level the frets and only then install the frets. :)

    Jul 16, 2019 at 8:04 PM
  6. rrobbone liked nomadh's post in the thread Titanium Nitride Fretwire?.

    I think you just nailed the issue. Could it be applied after the guitar was setup and leveled I wonder?

    Jul 16, 2019 at 8:04 PM
  7. rrobbone replied to the thread Introducing The New Agile 3010se Catalyst.

    I have an old school Radio Shack toggle in my cedar tele. It was a little stiff at first, but it's breaking in nicely. I think next...

    Jul 16, 2019 at 6:07 PM
  8. rrobbone replied to the thread Introducing The New Agile 3010se Catalyst.

    Wrong scale, poor choice for switches. I'll pass, which is a shame because I'd be very interested in something like Buckethead has....

    Jul 16, 2019 at 6:00 PM
  9. rrobbone replied to the thread Gibson Says You've Been Warned.

    More backpedalling....

    Jul 16, 2019 at 4:03 PM
  10. rrobbone replied to the thread Titanium Nitride Fretwire?.

    The "hammer-on" part of the technique is not meant to be taken literally.

    Jul 16, 2019 at 2:54 PM
  11. rrobbone liked stevebway's post in the thread Titanium Nitride Fretwire?.

    I think if you have to go to that extent to build a fret ,it's time to lighten ones technique.

    Jul 16, 2019 at 2:53 PM
  12. rrobbone replied to the thread Titanium Nitride Fretwire?.

    It’s a coating, not something infused within the metal. Just the action of working the frets into shape during normal maintenance would...

    Jul 16, 2019 at 5:34 AM